Adjusting The Front Shock Absorber Assemblies (Yfm25Rsea/Yfm250Rsea) - Yamaha YFM25RA Owner's Manual

Spring preload setting:
Minimum (soft):
1
Standard:
2
Maximum (hard):
5
EBU30050
Adjusting the front shock absorber as-
semblies (YFM25RSEA/YFM250RSEA)
These shock absorber assemblies are equipped
with a spring preload adjusting nut, a rebound
damping force adjusting screw, with a compres-
sion damping force adjusting bolt (for fast com-
pression damping), and a compression damping
force adjusting screw (for slow compression damp-
ing).
EWB02491
WARNING
G
Suspension components become hot during
operation. Never touch the compression
damping force adjusting bolt and screw, the
rebound damping force adjusting screw or
the oil reservoir with your bare hand or skin
until suspension components have cooled.
G
Always adjust the shock absorber assem-
blies on the left and right side to the same
setting. Uneven adjustment can cause poor
handling and loss of stability, which could
lead to an accident.
ECB00090
NOTICE
Never turn an adjusting mechanism beyond
the minimum and maximum settings.
TIP
Although the total number of clicks or turns of a
damping force adjusting mechanism may not ex-
actly match the following specifications due to
small differences in production, the actual number
of clicks or turns always represents the entire ad-
justing range. To obtain a precise adjustment, it
would be advisable to check the number of clicks
or turns of each damping force adjusting mecha-
nism and to modify the specifications as neces-
sary.
Spring preload
1. Loosen the locknut.
4-14
4