Station Selector Switch (For Dual Station) - Yamaha Helm Master Operation Manual

The remote control lever(s) must be in for-
ward (F) position before activating speed
control. The active indicator will be illuminat-
ed during operation. Each time the UP side
of the engine RPM switch is pressed the en-
gine speed will gradually increase and press-
ing the DN side of the switch will gradually
decrease speed.
1
3
1. Active indicator
2. Speed control switch
3. Engine RPM switch
Pressing the speed control switch will cancel
the speed control mode.
TIP:
When in speed control mode, the PTT
switches (STBD, Center , and PORT) do not
provide PTT function.
Function and operation of components
2
■ Station selector switch (for dual sta-
tion)
The station selector switch allows selecting
which station, main or second, will operate
the engines. When selecting a station the re-
mote control levers at both stations must be
in neutral (N). The active indicator will illumi-
nate at the selected station. When the oper-
ating station is changed, "Station activated"
will displayed on the Digital Network Gauge
(6Y9) at the selected station and a single
beep will sound. Changing operating stations
will deactivate any other functions, except
trim assist, that were active at the other sta-
tion.
B
SET
CANCEL
MENU
A
SET
CANCEL
MENU
B
station
activated SET
CANCEL
MENU
A
SET
CANCEL
MENU
1. Active indicator
2. Station selector switch
A. Main station helm
B. 2nd station helm
1 2
18