Replacing A Headlight Bulb - Yamaha GRIZZLY 350 YFM35FGIA Owner's Manual

Table of Contents

Advertisement

2. Remove the blown fuse, and then install a
new fuse of the
WARNING! Always use a fuse of the spec-
ified rating, and never use a substitute ob-
ject in place of the proper fuse. An
improper fuse or a substitute object can
cause damage to the electrical system,
which could lead to a fire.
Specified fuses:
Main fuse:
30.0 A
Headlight fuse:
15.0 A
Ignition fuse:
15.0 A
8
Four-wheel-drive motor fuse:
10.0 A
Signaling system fuse:
10.0 A
Auxiliary DC jack fuse:
10.0 A
3. Turn the key to "ON" and turn on the electrical
circuits to check if the devices operate.
4. If the fuse immediately blows again, have a
Yamaha dealer check the electrical system.
specified
amperage.
[EWB02172]
EBU25481

Replacing a headlight bulb

If a headlight bulb burns out, replace it as follows.
1. Remove the cover at the rear of the headlight
by pulling it off.
1. Cover at the rear of the headlight
2. Remove the headlight bulb holder cover by
pulling it off.
8-45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grizzly yfm35fwana

Table of Contents