Action Freeze Function - Electrolux ERG29710 User Manual

22 www.electrolux.com

2.5 Action Freeze function

You can activate the Action Freeze func-
tion by pressing the Action Freeze switch.
The Action Freeze light will light up.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressing Action Freeze
switch.
The Action Freeze light will switch off.
2.6 Excessive temperature
alarm
In the event of an abnormal temperature
rise inside the freezer (e.g. power cut)
Fridge Control panel
ON/OFF
1 2
1.
Pilot light
2. ON/OFF switch
3. Temperature regulator (warmest)
4. Temperature indicator
5. Temperature regulator (coldest)
6.
Action Cool light
7. Action Cool switch
2.7 Switching on
Insert the plug into the wall socket.
Press the ON/OFF switch .
The Pilot Light will light up.
2.8 Switching off
The fridge is shut off by pressing the ON/
OFF switch until the Pilot light and the
Temperature indicator switched off.
2.9 Temperature regulation
The temperature can be adjusted be-
tween +2°C and +8°C.
By pressing the Temperature regulators,
the current temperature setting flashes on
the Temperature indicator. It is possible to
modify the setting temperature only with
flashed indicator. To set a warmer tem-
Downloaded from Fridge-Manual.com Manuals
3 4 5 6 7
Alarm light will start to flash and a buzzer
will sound.
After the temperature has returned to nor-
mal, the Alarm light will continue to flash,
although the buzzer has stopped.
When the Alarm reset switch is pressed,
the warmest temperature reached in the
compartment flashes on the Temperature
indicator .
If the power has been off for a long time,
frozen food should be consumed as
quickly as possible, or cooked and then
re-frozen.
ACTION
COOL
perature, press warmest Temperature
regulator. To set a colder temperature,
press coldest Temperature regulator. The
Temperature indicator displays the newly
selected temperature for a few seconds
and then shows again the inside compart-
ment temperature.
The newly selected-temperature must be
reached after 24 hours.
2.10 Temperature indicator
During normal functioning the Tempera-
ture indicator shows the temperature in-
side the fridge.
CAUTION!
During the stability period by the
first starting the temperature dis-
played can not correspond to the
setting temperature. During this
time it is possible that the temper-
ature displayed is lower than the
setting temperature.
ACTION
FREEZE