Subscribe to Our Youtube Channel
Related Manuals for Maximum 054-4297-2
Summary of Contents for Maximum 054-4297-2
- Page 1 Model No. 054-4297-2 IMPORTANT: INSTRUCTION Please read this manual carefully before MANUAL using this product, and save it for reference.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Technical Specifications Safety Guidelines Key Parts Diagram Important Information Assembly Instructions Operating Instructions Maintenance Troubleshooting Parts List Warranty NOTE: If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-888-670-6682. -
Page 4: Technical Specifications
054-4297-2 | contact us 1-888-670-6682 TECHNICAL SPECIFICATIONS Rated Voltage 120V~, 60 Hz Rated Power Input Rated Speed 10,500 RPM* Compatible wheel sizes 5" (125 mm) & 4 1/2" (115 mm) Wheel guard sizes 5" (125 mm) & 4 1/2" (115 mm) Arbour Size 5/8"... - Page 5 RULES FOR SAFE OPERATION KNOW YOUR TOOL To operate this angle grinder, carefully read this instruction manual and all labels affixed to the tool. Keep this manual available for future reference. IMPORTANT This angle grinder should only be serviced by a qualified service technician. For more information, call the toll free helpline at 1-888-670-6682.
- Page 6 054-4297-2 | contact us 1-888-670-6682 Damaged or entangled cords increase the risk of electric shock. • When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
-
Page 7: Safety Guidelines
Just because the accessory can be attached to your power tool, it does not assure safe operation. • The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart. - Page 8 After inspecting and installing an accessory, position yourself and bystanders away from the plane of the rotating accessory and run the power tool at maximum no-load speed for one minute. Damaged accessories will normally break apart during this test time.
- Page 9 • The guard must be securely attached to the power tool and positioned for maximum safety, so the least amount of wheel is exposed towards the operator. The guard helps to protect the operator from broken wheel fragments, accidental contact with wheel and sparks that could ignite clothing.
- Page 10 • Maintain a firm grip on the power tool and position your body and arms to allow you to resist kickback forces. Always use the auxiliary handle, if provided, for maximum control over kickback or torque reaction during start- up. The operator can control torque reactions or kickback forces if proper precautions are taken.
-
Page 11: Key Parts Diagram
PACKAGE CONTENTS High-performance angle grinder, 5" (125 mm) grinding wheel, 5" (125 mm) & 4 1/2" (115 mm) wheel guards, anti-vibration auxiliary handle, wrench, 2 extra carbon brushes, tote, and instruction manual. KEY PARTS DIAGRAM PART PART Side handle Trigger switch Spindle-lock button Wheel guard Carbon brush cover... -
Page 12: Important Information
054-4297-2 | contact us 1-888-670-6682 IMPORTANT INFORMATION Before attempting to use this tool, become familiar with all of its operating features and safety requirements. For optimum performance and safety, read the following operating instructions carefully before using. WARNING! •... -
Page 13: Assembly Instructions
ASSEMBLY INSTRUCTIONS REPLACING THE WHEEL GUARD [4 1/2" (115 MM) AND 5" (125 MM)] This grinder is supplied with 5" (125 mm) and 4 1/2" (115 mm) TYPE27 grinding wheel guards. The size has been stamped on each guard (fig 1). Always make sure that a wheel guard of the proper size is used when grinding with different wheels. - Page 14 054-4297-2 | contact us 1-888-670-6682 TO INSTALL THE WHEEL GUARD 1. Open the guard latch. 2. Align the lugs on the guard with the notches on the gear box cover. 3. Rotate wheel guard into desired working position.
- Page 15 5. Thread the lock nut on the spindle with fig 4 the flat side of the flange facing up, Lock nut making sure the opening in the wheel is positioned around the raised portion of the lock nut (fig 4). Grinding wheel 6.
-
Page 16: Operating Instructions
054-4297-2 | contact us 1-888-670-6682 OPERATING INSTRUCTIONS TRIGGER SWITCH (fig 6) fig 6 Lock-on button 1. To turn the angle grinder on, depress the trigger switch. 2. To turn it off, release the trigger switch. LOCK-ON BUTTON The angle grinder is equipped with a... - Page 17 GENERAL OPERATION 1. For best control, hold the angle grinder firmly with one hand gripping the side handle and the other gripping the body of the angle grinder. 2. Always position the guard so that the exposed grinding wheel is pointing away from the operator.
-
Page 18: Maintenance
054-4297-2 | contact us 1-888-670-6682 MAINTENANCE Before cleaning or performing any maintenance, the tool should be unplugged from the power supply. Using compressed air may be the most effective cleaning method. Always wear safety goggles when cleaning tools with compressed air. - Page 19 TIGHTENING THE WHEEL fig 9 GUARD (fig 9) 1. Disconnect the plug from the electrical outlet. 2. Remove the flanges and the wheel; refer to the section “INSTALLING AND Screw REMOVING THE GRINDING WHEEL”. 3. Open the guard latch and rotate the guard to a proper position.
-
Page 20: Troubleshooting
054-4297-2 | contact us 1-888-670-6682 TROUBLESHOOTING SUGGESTED CORRECTIVE PROBLEM CAUSE OF THE PROBLEM ACTION Check to see that the supply cord is properly Tool was not plugged in. connected to an electrical supply. Motor does not start. Tool is still locked on... -
Page 21: Parts List
EXPLODED VIEW... - Page 22 054-4297-2 | contact us 1-888-670-6682 No. Part No. Description No. Part No. Description Gear Case 2823582000 4960330000 Carbon Brush Assembly 5610284000 Tapping Screw 5610010000 Tapping Screw Spindle Electric 2824769000 2830159000 Assembly Assembly Hexagon 5620360000 5620169000 Tapping Screw Lobuar Screw...
-
Page 23: Warranty
(with the same model, or one of equal value or specification), at the sole discretion of the Maximum Canada authorised repair centre (“Service Provider”). We will bear the cost of any repair or replacement and any costs of labour relating thereto. - Page 24 This warranty applies for a period of 5 years from the date of original retail purchase, as indicated on the bill of sale. Neither the retailer, Maximum Canada, nor the manufacturer shall be liable for any other expense, loss or damage, including, without limitation, any indirect, incidental, consequential or exemplary damages arising in connection with the sale, use or inability to use this product.
- Page 25 In addition to the 5-Year Limited Warranty, this MAXIMUM product is covered by our: 1-Year Repair Warranty...
Need help?
Do you have a question about the 054-4297-2 and is the answer not in the manual?
Questions and answers