Operation - Konig KN-HDMISW25 Manual

Back
1 Ethernet:
2 Audio Port:
3 HDMI Output:
4-7 HDMI Input:
8 DC/5V:
9 Power Switch:
10 Power LED:
11 IR:
12-15 Input LED:
16 2CH/5.1CH LED
17 Select:
18 ARC:
19 Select:
CONNECTION AND OPERATION:
CONNECTION
1. Connect HDMI input of the product to source devices. (Input cables are optional)
2. Connect HDMI output of the product to HDTV.
3. Connect audio port to Amplifier Receiver.
4. Connect Ethernet port to PC
5. Insert the DC side of 5V power supply into the unit and then connect the AC side of the power supply
into the wall outlet.
6. Turn on the power.

OPERATION

1. Source Select
Press "Select" button or remote control to switch Input sources from Input1 to Input4 manually.
2. 2CH/5.1CH Audio Output Select
Note: Only when the source supports 5.1CH output (including CD), this function is effective and it
realizes through the 2.1CH and 5.1CH buttons on the remote control. Press "2CH" button, the
product outputs 2CH audio and the LED turns off; press "5.1CH" button, the product outputs 5.1CH
audio and the LED turns on. When provided with power, it automatically selects 5.1CH audio output.
If the source can only supports 2CH audio output, the "5.1CH" button will become invalid, that is,
although you press "5.1CH" button, the product still outputs 2CH audio and the LED is still on.
Connect this port to PC. When HDTV with HEC enable HEC function, PC will
be connected to Ethernet.
Connect the three ports to Amplifier Receiver
When select ARC ON, audio output is from HDTV with ARC.
When select ARC OFF, audio output is from Source devices.
Connect this port to HDTV
Connect these ports to source devices
Connect this port to Power Supply
Turn on or off the power
When the switching is working, LED turns blue; When it is standby, LED
turns red
Receive the signal from Infrared Remote Control
LED will turn on when input port is selected
LED will turn on when 5.1CH button is pressed;
LED will turn off when 2CH button is pressed.
Press this button to select 4 inputs circularly.
ON/OFF LED
LED will turn on when ARC ON button is pressed, then this product will
enable ARC function, and audio signal will be from HDTV; LED will turn off
when ARC OFF button is pressed, then ARC function will be turned off, and
audio signal will be from source devices.
Press this button to select ARC on or off.
3