Table of Contents
Advertisement
To use the following tools while projecting images or files,
4
press [ ] and then select the icon under Quick pad.
Tool
Pointer
Pen
Eraser
Type
Colour
Thick
Clear
Exit
Exit
Exit
Press and hold [
5
Project an image via the camera
Project an image via the camera
Project an image via the camera
›
In Idle mode, open the application list and select
In Idle mode, open the application list and select
In Idle mode, open the application list and select
1
Projector
Adjust the projection distance and place the device on a
Adjust the projection distance and place the device on a
Adjust the projection distance and place the device on a
2
flat surface.
Align the subject with the camera lens.
3
Use Ambience mode
›
In Idle mode, open the application list and select
1
Projector
Set the display and sound settings.
2
Start.
Select
3
Function
Point to a part of the screen.
Write or draw on the screen.
Erase pen marks.
Change the pointer type.
Change the pen colour. This option is
available only when you select the pen.
Change the pen or eraser thickness. This
option is available only when you select
option is available only when you select
option is available only when you select
the pen.
Clear your input.
Close the quick pad.
Close the quick pad.
Close the quick pad.
] to turn off the projector.
] to turn off the projector.
] to turn off the projector.
→
→
→
Visual presenter.
Visual presenter
Visual presenter
→
Ambience mode.
Tools
129
Advertisement
Table of Contents
