Stand-By Function - LAVAZZA Jolie Operating Instructions Manual

EN IT
The machine rear features two outlets that can be used
for the power cord. You should use the most suitable
outlet for your needs.
Fit the supply plug into the power outlet.
Press the switch-on/supply button to switch the ma-
chine on.
MACHINE SETTING
The coffee machine starts the heating cycle. The
switch-on/supply button will start blinking to a light
white.
The machine will be ready for use when the switch-on/
supply button lights up to a steady white light.
At first power-on, supply at least 0.5 liters of water
without capsule placing a container under the coffee
spout.

STAND-BY FUNCTION

To ensure the energy conservation the machine au-
tomatically passes to the stand-by mode after 9 min-
utes of not being used. The machine can be set to the
stand-by mode manually, within a 9 minutes' time, by
keeping the button pressed down for at least 3 sec-
onds. This mode is indicated by the switching off of
the button. The machine can be reactivated by press-
ing the button again.
Keeping the button pressed for more than 10 seconds,
it will turn red indicating an error state. Disconnect and
reconnect the power plug to reset the machine.
20