English - ION DOCUSCAN User Manual

PLAYBACK
Note: The scanner will enter the playback mode after scanning an image. You could
also press the OK button to enter Playback Mode from Scan Mode.
Playback:
1. Press the LEFT or RIGHT buttons to enter Browse Mode, which lets you browse
through the scanned images (shown full screen).
2. Press the OK button to enter Thumbnail Mode from Browse Mode. All scanned
images stored on the SD/MMC card will be displayed in Thumbnail Mode.
3. Use the LEFT or RIGHT buttons repeatedly to move to the previous or the next
page.
4. Use the UP, DOWN, LEFT or RIGHT buttons to select an image, then press the OK button to view the image in full-
screen.
Zoom:
1. When you are viewing an image full-screen, press the ZOOM button to zoom in
on it. Each time of the button is pressed, the image will be enlarged in the
sequence of x2, x3, x4, and x5.
2. Use the UP, DOWN, LEFT or RIGHT buttons to move the pointer, which
represents the center of the zoomed-in area of the image you are viewing.
Playback Settings:
1. Press the MENU button to enter the Playback Settings Menu.
2. Use the LEFT / RIGHT buttons to select "Playback" or "Setup."
3. Press the UP / DOWN buttons to select an option from the submenus. See the
table below for the available settings.
Note: Press the MENU button repeatedly to go to the next highest menu or to exit
the Playback Menu.
MENU SUBMENU
Delete
Playback
Rotate
Language
Format
Setup
Calibration
Factory
Default
TRANSFER YOUR SCANNED IMAGES
1. Make sure your scanner's power is off before connecting it to your computer (to ensure the computer recognizes the
scanner properly).
2. Connect the included mini-USB cable to the scanner then connect the main USB cable on the other end to a USB port
on your computer.
3. Press and hold the POWER button to turn the scanner on.
4. Use the UP / DOWN buttons to select "Mass Storage" and press the OK button.
5. Once the connection is established:
• PC: a "Removable Disk" window will appear on your computer.
• Mac: a removable disk drive will mount on your computer.
6. Browse the contents of the removable disk, which will show the files stored on your SD/MMC card. "Drag and drop" the
files from the scanner to your computer.
7. When you are finished transferring your files:
• PC: double-click the "Safely Remove Hardware" icon in your computer's "system
tray" (near the clock). Select the "USB Mass Storage Device" and click "OK" to
disconnect the scanner from your computer.
• Mac: right-click the removable disk drive and select "Eject" to eject it safely.
8. Disconnect the mini-USB cable from the scanner and from your computer.
DESCRIPTION
Delete the scanned image – one image ("1") or all images ("All").
Rotate the scanned images: 0, 90, 180, or 270 degrees. (Note: The orientation
of the scanned images will remain unchanged when transferring them to your
computer, even if they have been rotated with this setting.)
English, German, French, Italian, Spanish, Dutch, Portuguese, Polish.
Deletes all the data on the SD/MMC card.
Select "OK" to recalibrate the scanner. Please see the CALIBRATION section for
instructions.
Restores the playback settings to their defaults.
5