Operation; Starting A Cold Engine - Yamaha WOLVERINE 450 YFM45FXY Owner's Manual

EBU19880
EBU19900
Read the Owner's Manual carefully before riding
the ATV.
EWB00630
WARNING
Read the Owner's Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury. If there is a control or func-
6
tion you do not understand, ask your Yamaha
dealer.
EBU26542

Starting a cold engine

EWB00640
WARNING
Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or do
not work smoothly, you could be unable to
control the ATV, which could lead to an acci-
dent or collision.

OPERATION

ECB00150
NOTICE
See the "Engine break-in" section on page 6-5
prior to operating the engine for the first time.
1. Turn the fuel cock to "ON".
2. Turn the main switch to "ON" and the engine
stop switch to "
3. Shift the drive select lever into the neutral or
park position. The corresponding indicator
light should come on, if it does not come on,
have a Yamaha dealer check the electrical cir-
cuit.
TIP
The engine can be started under the following con-
ditions:
G
The drive select lever is in the neutral or park po-
sition.
G
The rear brake lever is applied with the drive se-
lect lever in any position. However, it is recom-
mended to shift into the neutral or park position
before starting the engine.
6-1
".