In this section a list of Outbound IP filtering rules will be displayed.
Click the Add button to add a new rule.
Click the Edit button to reconfigure the rule.
Select the Remove option and click the Remove button to remove the specific rule.
After clicking the Add button the following page is available.
In this section we can create a new Outbound IP filter rule.
Filter Name: Enter the Outbound filtering rule name here.
IP Version: Select the IP version from the list. Options to choose from are IPv4 and
IPv6.
Protocol: Select the protocol used from the list. Options to choose from are
TCP/UDP, TCP, UDP, and ICMP.
Source IP address: Enter the source IP address here.
Source Port: Enter the source port number here.
Destination IP address: Enter the destination IP address here.
Destination Port: Enter the destination port number here.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
In this section a list of Outbound IP filtering rules will be displayed.
Click the Add button to add a new rule.
Click the Edit button to reconfigure the rule.
Select the Remove option and click the Remove button to remove the specific rule.
錯誤
錯誤! 使用
使用 [常用
常用] 索引標籤將
索引標籤將 Heading 1 套用到您想要在此處顯示的文字
錯誤
錯誤
使用
使用
常用
常用
索引標籤將
索引標籤將
D-Link DSL-7850U VDSL2 Router User Manual
套用到您想要在此處顯示的文字。 。 。 。
套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字
Page 84