Replacing The Tail/Brake Light Bulb; Removing A Wheel; Installing A Wheel - Yamaha GRIZZLY 350 YFM35FGY Owner's Manual

To raise a headlight beam, turn the headlight beam
adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).
1. Headlight beam adjusting screw
EBU25580

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, have a
Yamaha dealer replace it.
EBU25651

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
1. Wheel nut
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the nuts from the wheel.
5. Remove the wheel.
EBU25701

Installing a wheel

1. Place the ATV on a level surface.
2. Install the wheel and the nuts.
TIP
G
The arrow mark
the rotating direction of the wheel.
8-43
on the tire must point toward
8