Yamaha KODIAK 700 YFM70KDXH Owner's Manual page 44

es with the riding speed. You may lose control
and have an accident if you cannot make a
sharp enough turn for the speed you are trav-
eling.
EBU26608
On-Command four-wheel-drive switch
"2WD"/"4WD" (YFM70KPSH)
4
EWB00164
WARNING
Always stop the ATV before changing from
two-wheel drive to four-wheel drive and vice
versa. The ATV handles differently in two-
wheel drive than in four-wheel drive in some
circumstances. Changing from two-wheel
drive to four-wheel drive or vice versa while
moving may cause the ATV to unexpectedly
handle differently. This could distract the oper-
ator and increase the risk of losing control and
of causing an accident.
This ATV is equipped with a switch to change from
two-wheel drive to four-wheel drive and vice ver-
sa. Select the appropriate drive according to the
terrain and the conditions.
 "2WD" (two-wheel drive): Power is supplied to
the rear wheels.
 "4WD" (four-wheel drive): Power is supplied to
the rear and front wheels.
To change from two-wheel drive to four-wheel
drive, stop the ATV and push the switch in to the
"4WD" position. Then, the four-wheel-drive
indicator " " comes on in the multi-function dis-
play.
To change from four-wheel drive to two-wheel
drive, stop the ATV and push the switch in to the
"2WD" position.
1. On-Command four-wheel-drive switch "2WD"/"4WD"
4-12
1
2WD
4WD