Safety Precautions - Definitive Technology BP9000 SERIES Owner's Manual

SAFETY PRECAUTIONS

CAUTION! To reduce the risk of electric shock and fire, do not remove
the cover or back plate of this device. There are no user serviceable
parts inside. Please refer all servicing to licensed service technicians.
Avis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside of
a triangle is intended to alert the user to uninsulated "dangerous
voltage" within the device's enclosure. The international symbol of
an exclamation point inside of a triangle is intended to alert the user
to the presence of important operating, maintenance and servicing
information in the manual accompanying the device.
CAUTION! To prevent electrical shock, match wide blade of
plug to wide slot, fully insert. Attention: Pour eviter les chocs
electriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this
equipment to rain or moisture.
1. READ INSTRUCTIONS—All safety and operating instructions should
be read before operating the device.
2. RETAIN INSTRUCTIONS—The safety and operating instructions
should be retained for future reference.
3. HEED WARNINGS—All warnings on the device and in the operating
instructions should be adhered to.
4. FOLLOW INSTRUCTIONS—All operating and safety instructions
should be followed.
5. WATER & MOISTURE—The device should never be used in, on or
near water for risk of fatal shock.
6. VENTILATION—The device should always be located in such a way
that it maintains proper ventilation. It should never be placed in
a built-in installation or anywhere that may impede the flow of air
through its heat sink.
7. HEAT—Never locate the device near heat sources such as radiators,
floor registers, stoves or other heat-generating devices.
8. POWER SUPPLY—The device should only be connected to a power
supply of the type described in the operating instructions or as
marked on the device.
4
9. POWER CORD PROTECTION—Power cables should be routed so
they are not likely to be stepped on or crushed by items placed on
them or against them. Special attention should be paid to areas
where the plug enters a socket or fused strip and where the cord
exits the device.
10. CLEANING—The device should be cleaned in accordance
with manufacturer's instructions. We recommend using a lint roller or
household duster for the grille cloth.
11. PERIODS OF NON-USE—The device should be unplugged
when not being used for extended periods of time.
12. DANGEROUS ENTRY—Care should be taken that no foreign
objects or liquids fall or are spilled inside the device.
13. DAMAGE REQUIRING SERVICE—The device should be
serviced by licensed technicians when:
• The plug or power supply cord has been damaged.
• Objects have fallen on or liquid has spilled inside the device.
• The device has been exposed to moisture.
• The device does not appear to be operating properly or exhibits
a marked change in performance.
• The device has been dropped or the cabinet becomes damaged.
14. SERVICE—The device should always be serviced by licensed
technicians. Only replacement parts specified by the manufacturer
should be used. The use of unauthorized substitutions may result in
fire, shock, or other hazards.
POWER SUPPLY
1. The fuse and power disconnect device are located on the back
of the speaker.
2. The disconnect device is the power cord, detachable at either
the speaker or the wall.
3. The power cord must be disconnected from the speaker
before servicing.
This symbol on our electrical products or their packaging
indicates that it is forbidden in Europe to discard the product
in question as domestic waste. In order to ensure that you
dispose of the products correctly, please dispose of the
products according to local laws and regulations on the disposal
of electrical and electronic equipment. In doing so you are
contributing to the retention of natural resources and to the
promotion of environmental protection by the
treatment and disposal of electronic waste.