Advertisement
1. Press the ▲ button to select 12-hour time and the
Month/Date format.
2. Press the ▲ button again to select 24-hour time and the
Date/Month format.
Note: From the time display, press the TIME SET button to
select Month/Date or Year to display in the lower left-hand
corner.
The clock has two separate time alarms. Setting the alarms and
activating the alarms are separate actions.
1. Hold the AL-SET button for 2 seconds to enter alarm time
set mode for Alarm 1.
2. Press the ▲ or ▼ buttons to adjust the alarm time. The
minutes and hours are set together.
3. Hold the ▲ or ▼ buttons to change quickly.
4. Press the AL-SET button to confirm and move to Alarm 2.
5. Press the ▲ or ▼ buttons to adjust the alarm time. The
minutes and hours are set together.
6. Hold the ▲ or ▼ buttons to change quickly.
7. Press the AL-SET button to confirm and exit.
Activate/Deactivate Alarm 1 and Alarm 2
To activate or deactivate Alarm 1 or Alarm 2, use the slide
•
bars on the back of the clock.
There is a slide bar (ON/OFF) for AL 1 and for AL 2.
•
When active, Alarm 1 will show in the Date display with
•
alarm icon.
When active, Alarm 2 will show in the Temperature display
•
with alarm icon.
When alarm sounds, press the SNOOZE/LIGHT
•
button to silence the alarm for 5 minutes.
The alarm icon will flash.
•
617-1392B/617-1392W www.lacrossetechnology.com/support
Set Alarm 1 or Alarm 2
Snooze
Alarm
Icon
Page | 3
Advertisement
