Resolution Setting - LG S72P2-S Owner's Manual

,
Note
y HDMI is the abbreviated name for High
Definition Multimedia Interface. It is an
interface which transmits video and audio
signals in digital format. If a connected
HDMI device does not accept the audio
output of the unit, the HDMI device's audio
sound may be distorted or may not output.
y When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to "Resolution Setting")
y When you connect a HDMI or DVI
compatible device make sure of the
followings :
- Try switching off the HDMI/DVI device and
this unit. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this unit.
- The connected device's video input is set
correctly for this unit.
- The connected device is compatible with
720 x 576i (or 480i), 720 x 576p (or 480p),
1280 x 720p, 1920 x 1080i or 1920 x 1080p
video input.
y Not all HDCP-compatible HDMI or DVI
devices will work with this unit.
y The picture will not be displayed properly
with non-HDCP device.
y This unit does not playback and TV screen is
changed to black screen.
y If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft).
y Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the unit and then turn it
on again.
y When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
NA7520P-FU_DZAFLLX_ENG.indd 15

Resolution Setting

The unit provides several display resolutions
for HDMI OUT TO TV jack. You can change the
resolution by using [Setup] menu.
1. Press SETUP.
The [Setup] menu appears.
2. Use W/S to select [Display] option then press
D to move to the second level.
3. Use W/S to select the [Resolution] option then
press D to move to the third level.
4. Use W/S to select the desired resolution then
press ENTER ( ) to confirm your selection.
,
Note
If your TV does not accept the resolution you
have to set on the unit, you can set resolution
to 576p (or 480p) as follows :
Press Z for more than 5 seconds.
Connecting 15
2
2013-06-24 3:52:46