Samsung DA68-02952C-01 User Manual page 38

3. Vegetable & Fruit Drawers
To remove
• Simply lift the bin up and pull straight out.
• Tilt up the front of the drawer and pull straight
towards you. Then, move the drawer slightly
in the direction of the arrow in the illustration
below, and then pull out.
To re-install
• Insert the drawer into the frame rails and push
back into place.
• Slide the bin in above the desired location and
push down until it stops.
The drawers need to be removed before
the glass shelf above them can be lifted
CAUTION
out.
DA68-02952C (EN)-01.indd 38
4. Flex Zone
To remove the Flex Zone – Pull the Flex door
out to full extension. Lift the Flex Zone up, pulling
it to your body with both hands.
To re-install the Flex Zone – Open the Flex door
to full extension. Tilt the front of the Flex Zone up,
place the back of the Flex Zone onto the rails, and
then lower the front until the whole Zone rests on
the rails.
To remove the divider and the metal cooling
plate from the Flex Zone
1. Slide the divider to the end, and pull it up to
remove as shown.
2. Turn over the drawer to remove the metal
cooling plate.
The Drawer and Metal cooling plate are
heavy. It may cause a personal injury or
CAUTION
material damage.
English - 38
2015. 8. 25. 9:27