Dell PowerEdge T20 Series Getting Started Manual page 7

Table of Contents

Advertisement

Table 6. Physical specifications
Physical
Height
Width
Depth
Maximum configuration weight
Empty weight
Table 7. Environmental specifications
Environmental
NOTE: For additional information about environmental measurements for specific system configurations, see
dell.com/environmental_datasheets.
Temperature
Operating
Storage
Relative humidity
Operating
Storage
Maximum vibration
Operating
Non-operating
Maximum shock
Operating
Non-operating
36.29 cm (14.29 inch) with feet
36.0 cm (14.17 inch) without feet
17.5 cm (6.88 inch)
43.5 cm (17.12 inch) with bezel
40.0 cm (15.75 inch) without bezel
8.6 kg (18.95 lb)
8 kg (17.64 lb)
Continuous operation: 10 °C to 35 °C at 10% to 80% relative humidity
(RH), with 26 °C maximum dew point. De-rate maximum allowable dry
bulb temperature at 1 °C/300 m above 900 m (1°F per 550 ft).
NOTE: For information on supported expanded operating
temperature range and configurations, see dell.com/support/
manuals.
–40 °C to 65 °C (–40 °F to 149 °F) with a maximum temperature
gradation of 20 °C per hour
20% to 80% (noncondensing) at a maximum wet bulb temperature of 29
°C (84.2 °F)
5% to 95% at a maximum wet bulb temperature of 38 °C (100.4 °F)
0.26 G
at 5 Hz to 350 Hz (all operation orientations)
rms
2.2 G
at 5 Hz to 500 Hz for 15 min (all six sides tested)
rms
One shock pulse (all operating orientations) of 40 G for 2 ms in the
operational orientation
Six consecutively executed shock pulses in the positive and negative x,
y, and z axes (one pulse on each side of the system) of 71 G/2 ms half
sine shock
7

Advertisement

Table of Contents
loading

Table of Contents