Toro 30367 Operator's Manual page 7

108-1988
1. Belt routing
100-5622
1. Height of cut adjustment
108-1986
1. Height of cut
100-6578
1. Entanglement hazard, belt—do not operate the machine with
the shields or guards removed; always keep the shields and
guards in place. Stay away from moving parts.
108-5297
(Models 30376 and 30367)
1. Warning—read the Operator's Manual.
2. Tipping hazard—lower the cutting unit when driving down
slopes. For 2 wheel drive units, add a 80 kg (170 lb) rear
weight to GM 3280D units and a 92 kg (205 lb) rear weight to
GM 3320 units. For 4 wheel drive 3280 D units, do not add
weight.
110-0625
(Models 30379 and 30369)
1. Warning—read the Operator's Manual.
2. Tipping hazard—lower the cutting unit when driving down
slopes. For 2 wheel drive units, add a 93 kg (205 lb) rear
weight to GM 3280D units and a 109 kg (240 lb) rear weight to
GM 3320 units. For 4 wheel drive 3280 D units, add a 32 kg
(70 lb) rear weight.
7