Safety Precautions; Never Do This; Always Do This - LG GL6000ER Owner's Manual

Safety
Precautions
To prevent injury and property damage, follow these instructions.
Incorrect operation due to ignoring instructions might cause harm or damage, the seriousness of which is
indicated by the following symbols.
WARNING
CAUTION
The following items are classified by these symbols.
Plug in the power plug
properly.
• Doing so may cause electric
shock or fire due to heat
generation or electric shock.
Do not modify power cord
length or share the outlet
with other appliances.
• Doing so may cause electric shock or
fire due to heat generation.
Always plug into a
grounded outlet.
• No grounding may cause electric
shock (See Installation Manual).
Unplug the unit if strange
sounds, odors, or smoke
comes from it.
• Such a unit may pose a risk of
fire or electric shock accident.
Keep firearms away.
Precautions
This symbol shows the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to property.

Never Do This

Always Do This

WARNING
WARNING
Do not operate or stop the
unit by inserting or pulling
out the power plug.
• Doing so may cause electric
shock or fire due to heat
generation.
Do not operate with wet
hands or in damp
environment.
• Doing so may cause electric
shock.
Do not allow water to run
into electric parts.
• Doing so may cause failure of
machine or electric shock.
Do not use the socket if it is
loose or damaged.
• Doing so may cause fire or
electric shock.
Do not use the power cord
close to heating tools.
• Doing so may cause fire or
electric shock.
3
Do not damage or use an
unspecified power cord.
• Doing so may cause electric shock or fire.
• If the supply cord is damaged, it must be replaced
by the manufacturer, the manufacturer's service
agent, or a similarly qualified person in order to
avoid a hazard. (Y attachment)
Do not direct airflow at
room occupants only.
• This could damage your health.
Always install air leakage
breaker and a dedicated
switching board.
• Failure to install these may cause
fire or electric shock accident.
Do not open the entrance
during operation.
• It may cause electric shock.
Do not use the power cord near
flammable gas or combustibles such
as gasoline, benzene, thinner, etc.
• Doing so may lead to an
explosion or fire.