JVC KS-FX222 Servise Manual page 4

KS-FX222
QQ
2.1.4 Removing the heat sink 3 7 63 1515 0
(See Fig.4)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Remove the two screws B and two screws C attaching the
heat sink on the left side of the body, and remove the heat
sink.
2.1.5 Removing the rear panel
(See Fig.5 )
• Prior to performing the following procedure, remove the front
panel assembly and bottom cover.
(1) Remove the two screws D, two screws E and three screws
F attaching the rear panel on the back of the body.
2.1.6 Removing the main board
(See Fig.6)
• Prior to performing the following procedure, remove the front
panel assembly, bottom cover, front chassis, heat sink and
TE
L 13942296513
rear panel.
(1) Remove the two screws G attaching the main board on the
top chassis.
(2) Disconnect the two connectors CN901 and CN721 on the
main board from the cassette mechanism assembly.
www
1-4 (No.49772)
http://www.xiaoyu163.com
x ao
y
. i
http://www.xiaoyu163.com
8
C
D F
E
Q Q
3 6 7 1 3
G
CN721
u163
.
2 9 9 4 2 8
B C
Heat sink
Fig.4
E F
Fig.5
Main board
1 5 0 5 8 2 9 9 4
CN901
Fig.6
m
co
9 9
D
2 8 9 9
G