Color Border Adjustment - LG DP-3510 YYDA Service Manual

Delta Elec. Inc.

7. Color Border Adjustment

Step 1 : Adjust integration rod screw to eliminate color edge @ White pattern
Step 2 : Adjust lamp module angle to set the maximum brightness measured by CL200
Company Confidential
65
DP-3510 YYDA & DP-2510 YYDA
1. Adjust the hexagonal screw in order to right and lift side
color border disappeared.
left side color border on the full white pattern)
Screw 1
2. Adjust the hexagonal screw in order to up and down side
color border disappeared. By the color border is margin value on
the down side of full white pattern. (Enable just disappearing of
down side color border on the full white pattern)
Screw 2
=> Adjusted screw.
=> The initial fixed point.
=> Fixed screw.
Loosed the fixed screw, CL200 is putted on the left corner of
the screen （When full set is putted upside down） , to adjust the
adjusted screw gets the highest luminance value then fixed
the screw in the moment.
LGE_______________________
(
Enable just disappearing of
Delta____________
rev.00
2007/11/30