LG DP-3510 YYDA Service Manual page 59

Delta Elec. Inc.
4.
If more than one input device is
connected, press the SOURCE
button and use ▲▼ to scroll among
devices.
(Component is supported through
the RGB to COMPONENT
ADAPTER.)
5.
When the "Power Off? /Press Power
again" message appears, press the
POWER button. The projector turns
off.
Caution:
1. Be sure to remove the lens cap before starting projector.
Do not unplug the power cord until the Lamp LED (on Cooling mode) stops
2.
flashing–indicating the projector has cooled down.
Company Confidential
59
DP-3510 YYDA & DP-2510 YYDA
•
RGB: Analog RGB
Component: DVD input YCbCr / YPbPr,
or HDTV input YPbPr via HD15 connector
•
Composite Video: Traditional composite video
• S-Video: Super video (Y/C separated)
LGE_______________________
rev.00
Delta____________
2007/11/30