Restart
When the outdoor readings show dashes:
•
Bring the sensor in the house five feet from the station.
•
Remove batteries from the sensor, as well as, the batteries and AC
adapter from the station.
•
Press any button 20 times.
•
After 15 minutes insert batteries into the sensor, as well as batteries
and AC adapter into the station.
•
Wait 15 minutes to establish a strong connection. Place sensor outside
in shaded location.
Low Battery Icons
The Low Battery Icon indicates when batteries are in the station or sensor.
•
If the icon is displayed by the outdoor temperature, replace the
batteries in the outdoor sensor.
•
If the icon is displayed near the indoor temperature, replace the
batteries in the station.
Care and Maintenance
•
Do not mix old and new batteries
•
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
•
Always purchase the correct size and grade of battery most suitable for
intended use.
•
Replace all batteries of a set at the same time.
•
Clean the battery contacts and also those of the device prior to battery
installation.
•
Press Ensure the batteries are installed with correct polarity ( + and - ).
•
Remove batteries from equipment which is not to be used for an
extended period of time.
•
Remove expired batteries promptly.
Specifications
Indoor Temperature:
Outdoor Temperature: -40 F to 140 F (-40C to 60C)
Power for Station:
Adapter Number:
Optional Batteries:
TX141-Bv2 Sensor:
Battery Life:
Station:
Sensor:
308-1415
32 F to 122 F (0C to 50C)
5 volt AC adapter primary
GPU280500150WDOO
2 AA LR6 batteries.
2 AA LR6 batteries
24 months with reputable batteries brands
5.98" H x 3.25" W x 2.17" D
(152 x 82.5 x 55 mm)
5.12 " H x 0.82" W x 1.57" D
www.lacrossetechnology.com/support
(40 x 20.8 x 130mm)
Page | 6