Advertisement
7. Install the Seat by:
a. Mounting the Seat Bracket to the bottom of the Seat with the Bolts and Washers.
b. Slide the Seat onto the Frame and install the Quick Release Levers.
c. The Levers are NOT wing nuts, they are cams. With the Lever pointed straight out
from the frame, tighten by hand then fold the lever over and check for tightness.
Adjust as necessary.
High Roller USA, LLC • PO Box 314, Lafayette, CO 80026 • 720-989-1969 • Info@HighRollerUSA.com • www.HighRollerUSA.com
f fb.com/HighRollerUSA • t twitter.com/HighRollerUSA • Y HighRollerUSA • S HighRoller.USA •
Adult Size. Race Ready.
page 5 of 6
10028-H
Flat Washer
Split Washer
5/16" Bolt
Washer
&
HighRollerUSA
Advertisement
