3. To install the Fork and Handlebars, arrange the Headset Bearings and install in this order
(top to bottom):
e. Bearing (balls point down, cage points up)
g. Bearing (balls point up, cage points down)
4. Slide the Stem onto the Fork and snug down the Cap hand tight. DO NOT OVERTIGHTEN.
This just adjusts the headset bearings.
High Roller USA, LLC • PO Box 314, Lafayette, CO 80026 • 720-989-1969 • Info@HighRollerUSA.com • www.HighRollerUSA.com
f fb.com/HighRollerUSA • t twitter.com/HighRollerUSA • Y HighRollerUSA • S HighRoller.USA •
Adult Size. Race Ready.
b. Plastic Split Ring
d. Dust Seal (text up)
h. Dust Seal (text down)
a. Stem
c. Race
f. Frame
i. Fork
Bearings are adjusted properly when:
a. Wheel can turn freely left and right,
b. Bearings don't "knock" when you hold the
brake and rock forward and back.
page 3 of 6
10028-H
&
HighRollerUSA