GMC SAVANA 2013 Owner's Manual page 51

Three-Passenger Seat Shown
4. Push the pin(s) marked R down
until they are in the
retaining clip.
Three-Passenger Seat Shown
5. Push the pin(s) marked L down
until they are in the
retaining clip.
6. If the vehicle has a floor mat, put
the flap back to its original
position.
Seats and Restraints
7. Repeat this procedure for the
other seat base.
8. Connect the mini-latch plates for
the lap-shoulder belts by
inserting the latch plates into the
mini-buckles attached at the
outboard positions of the bench
seat. Do not twist the belts.
9. Check that all locking pins are
locked into place before
operating the vehicle.
3-7