Table of Contents
Advertisement
7-24
Infotainment System
Storing and Deleting Phone
Numbers
The system can store up to 30
phone numbers as name tags in the
Hands-Free Directory that is shared
between the Bluetooth and OnStar
systems, if equipped.
The following commands are used
to delete and store phone numbers.
Store: This command will store a
phone number, or a group of
numbers as a name tag.
Digit Store: This command allows
a phone number to be stored as a
name tag by entering the digits one
at a time.
Delete: This command is used to
delete individual name tags.
Delete All Name Tags: This
command deletes all stored name
tags in the Hands-Free Calling
Directory and the OnStar
Turn-by-Turn Destinations Directory,
if equipped.
Using the Store Command
1. Press and hold
/
two seconds.
2. Say Store.
3. Say the phone number or group
of numbers you want to store all
at once with no pauses, then
follow the directions given by the
system to save a name tag for
this number.
Using the Digit Store Command
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press and hold
/
two seconds.
2. Say Digit Store.
3. Say each digit, one at a time,
that you want to store. After
each digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
for
digit has been entered, say
Store, and then follow the
directions given by the system to
save a name tag for this number.
Using the Delete Command
1. Press and hold
two seconds.
2. Say Delete.
3. Say the name tag you want to
delete.
Using the Delete All Name Tags
Command
This command deletes all stored
name tags in the Hands-Free
Calling Directory and the OnStar
Turn-by-Turn Destinations Directory,
if equipped.
for
To delete all name tags:
1. Press and hold
two seconds.
2. Say Delete all name tags.
/
for
/
for
Advertisement
Chapters
Table of Contents
