Panasonic CS-20PM1HPK Installation Manual page 4

• Where corrosive gas like sulfurous gas exists. (Copper tubing and brazed spots may corrode,
which could eventually lead to refrigerant leaks.)
• Where exposed to combustible gases and where volatile flammable gas like thinner or gasoline
is used. (Gas in the vicinity of the unit could ignite.)
• Where machines can generate electromagnetic waves. (Control system may malfunction.)
• Where the air contains high levels of salt such as that near the ocean and where voltage fluctu-
ates greatly such as that in factories. Also in vehicles or vessels.
• Ventilate the room if refrigerant gas leakage occurs during the installation work. Exposure gas to flame or
hot object may result in production of toxic gases.
• When the installation work is finished, check to make certain that refrigerant gas is not leaking. Refrigerant
gas leakage and its exposure to flame or hot object in fan heater, stove, cooking appliance, etc. may result
in production of toxic gases.
• This unit, both indoor and outdoor, is suitable for installation in a commercial and light industrial environ-
ment.
If installed as a household appliance it could cause electromagnetic interference.
2-2 ACCESSORIES
Check the following accessories are included with your unit.
Name Drain hose
Quantity 1 set
Hose × 1
Clamp metal × 1
(1) (2)
Shape
2-3 OPTIONAL ACCESSORIES
• These are two types of remote controllers: wired and wireless. Select a remote controller according to
customer request and install in an appropriate place.
Wired type
Wireless type (Separate type)
NOTE
• If the customer wishes to use a remote controller that is not listed above, select a suitable remote controller
after consulting catalogs and technical materials.
3
Insulation for
fitting
1 set
(3) For gas pipe
(4) For liquid pipe
Remote controller
Heat pump type
Cooling only type
Sealing pad Clamp
1 set 8
(6)
(5)
Model No.
CZ-01RT11P
CZ-02RWF12P
–
Level adjustment
screw
4
[Other]
• Operation
(7)
manual
• Installation
manual
English