Disassembly Instructions - Aiwa HS-RX837 Service Manual

DISASSEMBLY INSTRUCTIONS

1. "REAR, CABINET" Removal
1) Remove the battery lid. (1)
2) Remove the four screws.
3) Insert tweezers or like into the gap of the battery
insertion slot as shown, and remove the hook.
4) Remove the cabinet assembly in the direction of the
arrow (2).
2. "MAIN BOARD" Removal
1) Remove three screws A.
2) Remove the two screws B, and remove the
headphones jack.
3) Remove soldering of the motor terminal. (1)
4) Remove soldering of the battery terminal (-) (2).
Screws
Screws
Screws
B Screws B Screws
2
CABI ASSY, REAR
1
LID, BATT
2
Hook
Tweezers
A Screws
A Screws
1
2
Screws
MAIN board