Advertisement
before using your Kenwood
appliance
Read these instructions carefully and
retain for future reference.
Remove all packaging and any
labels.
safety
Always use the filter and never
overfill - boiling water may splash
out.
Avoid contact with steam coming
out of the spout area when pouring
and out of the lid or spout area
when refilling.
Beware: the metal body of the kettle
will get hot during operation.
Never let the cord hang down where
a child could grab it.
Always unplug your kettle
when not in use.
Never put the kettle, powerbase,
cord or plug in liquid.
Never use a damaged appliance.
Get it checked or repaired: see
'service and customer care'
Caution: Do not operate the kettle
on an inclined surface.
Only use the powerbase supplied
and keep it clean and dry.
Make sure the lid is secure before
switching the kettle on.
Warning: Do not open the lid while
the water is boiling.
Make sure the kettle is switched off
before lifting or pouring.
Remove the kettle from the base
before filling or pouring.
Never put the kettle near or on
cooker hot plates or gas burners.
This kettle is for boiling water only.
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
English
Children should be supervised to
ensure that they do not play with
appliance.
Only use the appliance for its intend
domestic use. Kenwood will not ac
any liability if the appliance is subjec
improper use, or failure to comply w
these instructions.
before plugging in
Make sure your electricity supply
the same as the one shown on t
underside of your kettle.
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility an
EC regulation no. 1935/2004 of
27/10/2004 on materials intende
for contact with food.
before using for the first ti
1 Wrap any excess cord around th
bracket on the underside of the
powerbase
2 Fill to 'MAX', boil, then pour the
water away. Repeat 2 to 3 times
key
spout
lid
water level gauge
on/off switch with indicator ligh
360° powerbase
cord wrap
filter
4
.
Advertisement
