Using The Appliance - Philips QG3250 Instruction Manual

EnGlish
The charging light on the adapter goes on to indicate that the
,
appliance is charging.
Note: The charging light does not change colour and does not switch off when
the appliance is fully charged.
Note: You can also charge the appliance by plugging the adapter directly in to
the appliance.

Using the appliance

hair clipping
Preparing for hair clipping
Make sure that the head of the person whose hair you intend to cut
1
is at the same level as your chest. This ensures that all parts of the
head are clearly visible and within easy reach.
Comb the hair in the growth direction (Fig. 6).
2
hair clipping with hair clipping comb
Attach the trimmer onto the handle ('click'). (Fig. 7)
1
Slide the hair clipping comb into the guiding grooves on both sides of
2
the handle ('click') (Fig. 8).
To set the comb to the desired setting, press the setting selector (1)

and slide the comb to the desired hair length setting (2) (Fig. 9).
You can choose any setting between 3 and 19mm.
Tip: Write down the hair length settings you selected to create a certain
hairstyle as a reminder for future clipping sessions.
Switch on the appliance (Fig. 10).

Move the appliance slowly and against the direction of hair growth.
5
Press lightly.
Note: Since hair grows in different directions, you need to move the appliance in
different directions as well (upward, downward or across) (Fig. 11).
Always make sure that the flat part of the comb is in full contact with
6
the scalp to obtain an even result (Fig. 12).