Dell M109S User Manual page 21

EYSTONE
K —Adjusts the image distortion caused by tilting the projector.
ENU OSITION
M P
ENU RANSPARENCY
M T
M ENU T IMEOUT
OSD disappears after 30 seconds of non-activity.
M ENU L OCK —Select On to enable Menu Lock and hide the OSD menu. Select Off to
disable the Menu Lock and display the OSD menu.
NOTE:
on the control panel for 15 seconds, then disable the function.
P ASSWORD —When Password Protect is enabled, a Password Protect screen requesting
you to enter a password will be displayed when the power plug is inserted into the
electrical outlet and the power for the projector is first turned on. By default, this
function is disabled. You can enable this feature using the Password menu. This
password security feature will be activated the next time you turn on the projector. If
you enable this feature, you will be asked to enter the projector's password after you
turn on the projector:
1st time password input request:
1
Go to Setup menu, press Enter and then select Password to Enable the password
a
setting.
Enable the Password function will pop up a character screen, key in a 4-digit number
b
from the screen and press the Enter button.
To confirm, enter the password again.
c
If the password verification is successful, you may resume with accessing the
d
projector's functions and its utilities.
Downloaded from ProjectorsManual.com Manuals
—Allows you to select the position of the OSD menu on the screen.
—Select to change the transparency level of the OSD background.
—Allows you to adjust the time for an OSD Timeout. By default, the
If the OSD disappears while you disable Menu Lock, press the Menu button
Using Your Projector
21