Honda BE-LS22TL6505GO Operation Manual page 31

• This Operator's Manual covers several models. Log splitter features
may vary by model. Not all features in this manual are applicable to all
log splitter models and the log splitter depicted may differ from yours.
ENGINE CONTROLS
See the Engine Operator's Manual for the location and function of the
controls on the engine.
BEAM LOCKS
These two locks, as their name suggests, are used to secure the beam
in the horizontal or the vertical position. The vertical beam lock is located
next to the engine. The horizontal beam lock is located on the beam
support latch bracket.
CONTROL HANDLE
The control handle has three positions; Forward, Neutral and Reverse.
See the Operation section for instructions.
SPLITTING WEDGE
The wedge is used to split the wood.
LOG DISLODGER
The log dislodger is designed to remove any partially split wood from the
wedge. This may occur while splitting large diameter wood or freshly cut
wood.
LOG TRAY
The log tray is designed to catch the log after it is split.
TONGUE
The tongue is used to attach to a towing vehicle for transportation.
END PLATE
The end plate holds the log in place while the wedge splits the log.
SET-UP
NOTICE
31