Honda BE-LS22TL6505GO Operation Manual page 18

STEP 2: Remove all loose parts included in the container, e.g. operator's
manual, wheels, hardware box and engine box.
STEP 3: Use scissors or a knife to cut and remove the straps secur-
ing the parts to the beam or tank assembly, including fenders, tongue
assembly, log tray & log dislodger assemblies, then put aside these parts
for assembly.
• DO NOT remove the strap securing the hydraulic hoses assemblies
to the beam at this time, until you do the assembly procedure of the
hoses.
STEP 4: Use a pry bar or claw hammer to remove the plywood splinters
securing the beam and tank assemblies on the crate bottom. Take out the
two assemblies.
STEP 5: Inspect all component assemblies, parts and accessories ac-
cording to the packing list attached in this manual. Make sure all items
listed in the packing list are included, and of no shipping damage.
If any parts are damaged or missing, please call the authorized service
dealer for assistance.
• DO NOT discard the packing materials until you have carefully
inspected and satisfactorily operated the tool.
18
ASSEMBLY
NOTICE
NOTICE