Sound Issues; Hdmi Connection Issues; Computer Connection Issues; Contact Us - Philips 32PFL5605/98 User Manual

Sound issues

There is a picture but sound quality is poor:
Note
‡
If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
‡ Check that all cables are properly
connected.
‡ Check that the volume is not set to 0.
‡ Check that the sound is not muted.
There is a picture but the sound quality is
poor:
‡ Check that the sound settings are
correctly set.
There is a picture but sound comes from one
speaker only:
‡ Verify that sound balance is set to the
centre.

HDMI connection issues

There are problems with HDMI devices:
‡ Note that HDCP (High-bandwidth Digital
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
‡ If the TV does not recognize the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
‡ If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
‡ If you use an HDMI-to-DVI adapter
or HDMI to DVI cable, check that an
additional audio cable is connected to
AUDIO L/R or AUDIO IN (mini-jack
only).
30 EN
Downloaded From TV-Manual.com Manuals

Computer connection issues

The computer display on the TV is not stable:
‡ Check that your PC uses the supported
resolution and refresh rate.
‡ Set the TV picture format to unscaled.

Contact us

If you cannot resolve your problem, refer to
the FAQs for this TV at www.philips.com/
support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in this user manual.
Warning
‡
Do not attempt to repair the TV yourself. This
may cause severe injury, irreparable damage to
your TV or void your warranty.
Note
‡
Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.