Sony HXCE-FB70 Operating Instructions Manual page 21

a POWER switch
Turns on or off the power. In the "?"
position, the power is on. In the "a"
position, the power is off.
b ALARM indicator
Lights in red when an error occurs on
the unit or camera system.
c CAM POWER indicator
Lights when the unit supplies power to
the camera/camcorder.
d CAMERA connector (optical
multi connector)
Connect to the CA-FB70 HD Camera
Adaptor using an optical composite
cable. Power supply, all camera/
camcorder signals, such as control
signal, video signal and audio signal,
can be transmitted.
Pin No. Signal name
A Optical INPUT
B Optical OUTPUT
1 DC OUT (GND)
2 NC
3 NC
4 DC OUT (+48 V)
CAUTION
CAMERA connector is non LPS
(Limited Power Source) circuit. This
connector is connected to the CA-
FB70.
ATTENTION
Le connecteur CAMERA n'est pas un
circuit LPS (Limited Power Source). Ce
connecteur est raccordé au CA-FB70.
VORSICHT
Der Anschluss CAMERA ist ein Nicht-
LPS-Schaltkreis (LPS: Limited Power
Source, Spannungsversorgung mit
begrenzter Leistung). Dieser Anschluss
wird mit der CA-FB70 verbunden.
e CCU connector (optical fiber
connector)
Connect to the CCU using a single-
mode optical fiber cable. All signals
(except power supply) can be
transmitted by a pair of single-mode
optical fiber cables.
Pin No. Signal name
A Optical INPUT
B Optical OUTPUT
1 NC
2 NC
3 NC
4 NC
f AC IN connector
Use an optional power cord to connect
to an AC outlet. To fasten the power
cord to the unit, use an optional plug
holder.
Names and Functions of Parts 21