Sony HXCE-FB70 Operating Instructions Manual page 14

English
Before operating the unit, please read
this manual thoroughly and retain it for
future reference.
WARNING
To reduce the risk of fire or
electric shock, do not expose
this apparatus to rain or
moisture.
To avoid electrical shock, do
not open the cabinet. Refer
servicing to qualified
personnel only.
THIS APPARATUS MUST BE
EARTHED.
This symbol is intended to
alert the user to the
presence of important
operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.
WARNING: THIS WARNING IS
APPLICABLE FOR USA ONLY.
If used in USA, use the UL LISTED
power cord specified below.
DO NOT USE ANY OTHER POWER
CORD.
Plug Cap Parallel blade with ground
pin (NEMA 5-15P
Configuration)
Cord Type SJT, three 16 or 18
AWG wires
Length Minimum 1.5 m (4 ft. 11in.),
Less than 2.5 m (8 ft. 3 in.)
Rating Minimum 10A, 125V
14
Using this unit at a voltage other than
120V may require the use of a different
line cord or attachment plug, or both. To
reduce the risk of fire or electric shock,
refer servicing to qualified service
personnel.
WARNING: THIS WARNING IS
APPLICABLE FOR OTHER
COUNTRIES.
1. Use the approved Power Cord (3-
core mains lead)/Appliance
Connector/Plug with earthing-
contacts that conforms to the safety
regulations of each country if
applicable.
2. Use the Power Cord (3-core mains
lead)/Appliance Connector/Plug
conforming to the proper ratings
(Voltage, Ampere).
If you have questions on the use of the
above Power Cord/Appliance
Connector/Plug, please consult a
qualified service personnel.
For kundene i Norge
Dette utstyret kan kobles til et IT-
strømfordelingssystem.
For the customers in the U.S.A.
This equipment has been tested and
found to comply with the limits for a
Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
when the equipment is operated in a
commercial environment. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instruction manual, may cause
harmful interference to radio
communications. Operation of this
equipment in a residential area is likely
to cause harmful interference in which
case the user will be required to correct
the interference at his own expense.