Health And Safety Information; Fcc Rf Exposure Information (Sar); Fcc Regulations - Zte AVID 828 Quick Start Manual

Hide thumbs Also See for AVID 828:
Table of Contents

Advertisement

HEALTH AND SAFETY INFORMATION

FCC RF EXPOSURE INFORMATION (SAR)

This phone is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the United States .
During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands, and placed in positions that
simulate RF exposure in usage against the head with no separation,
and near the body with the separation of 10 mm . Although the SAR is
determined at the highest certified power level, the actual SAR level of
the device while operating can be well below the maximum value . This is
because the phone is designed to operate at multiple power levels so as
to use only the power required to reach the network . In general, the closer
you are to a wireless base station antenna, the lower the power output . The
exposure standard for wireless devices employing a unit of measurement
is known as the Specific Absorption Rate, or SAR . The SAR limit set by the
FCC is 1 . 6 W/kg .
This device is complied with SAR for general population/uncontrolled
exposure limits in ANSI/IEEE C95 . 1 -1992 and had been tested in accordance
with the measurement methods and procedures specified in IEEE1528 .
The FCC has granted an Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines . SAR information on this model phone is on file
with the FCC and can be found under the Display Grant section of
www . f cc . g ov/oet/ea/fccid after searching on FCC ID: SRQ-Z828 .
20
For this device, the highest reported SAR value for usage against the head
is 1.04 W/kg, for usage near the body is 1.19 W/kg .
While there may be differences between the SAR levels of various phones
and at various positions, they all meet the government requirements .
SAR compliance for body-worn operation is based on a separation distance
of 10 mm between the unit and the human body . Carry this device at least
10 mm away from your body to ensure RF exposure level compliant or lower
to the reported level . To support body-worn operation, choose the belt
clips or holsters, which do not contain metallic components, to maintain a
separation of 10 mm between this device and your body .
RF exposure compliance with any body-worn accessory, which contains
metal, was not tested and certified, and uses such body-worn accessory,
should be avoided .

FCC REGULATIONS

This cellphone complies with part 15 of the FCC Rules . Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation .
This cellphone has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules . These limits are
designed to provide reasonable protection against harmful interference in
a residential installation . This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications .
HEALTH AND SAFETY INFORMATION
21

Advertisement

Table of Contents
loading

Table of Contents