Advertisement
CARE AND CLEANING
Cleaning Exposed Bake Ovens
WARNING
The oven bake and broil elements may appear to have
cooled after they have been turned off. The elements may
still be hot and burns may occur if these elements are
touched before they have cooled sufficiently.
Figure 12: Exposed bake oven cavity
The bake element is located in the bottom of the oven
cavity
(See Figure
12). Remove the bottom oven rack
before raising the element. Be careful not to raise the
element more than 4 or 5 inches from the resting position.
This will allow easier access to the oven bottom for
cleaning.
20
Replacing the Oven Light
The interior oven lights are located at the rear of the oven
cavity and are covered with a glass shield. The glass shield
must be in place whenever the oven is in use (See
Figure
13).
To replace the oven interior light bulb:
CAUTION
Be sure the oven is unplugged and all parts are cool
before replacing oven light.
1. Turn electrical power off at the main source or unplug
the appliance.
2. Remove interior oven light shield by turning a quarter
turn counter-clockwise.
3. Replace bulb with a new T-4 type Halogen 25 watt
appliance bulb.
NOTE
Do not allow your fingers to touch the new bulb when
replacing. This will shorten the life of the bulb. Use a
paper towel or cotton glove while handling the new bulb
when installing.
4. Replace glass oven light shield by rotating clockwise.
5. Turn power back on again at the main source (or plug
the appliance back in).
6. Be sure to reset the time of day on the clock
Figure 13: Wall oven Halogen light
Advertisement
