Read Diagnostic Trouble Code (Dtc) - Subaru forester 2004 Service Manual

Read Diagnostic Trouble Code (DTC)

IMMOBILIZER (DIAGNOSTIC)
6. Read Diagnostic Trouble
Code (DTC)
A: OPERATION
1) On the «Main Menu» display screen, select the
{Each System Check}, and then press the [YES] key.
2) On the «System Selection Menu» display screen,
select the {Engine Control System}, and then press
the [YES] key.
3) Press the [YES] key after displayed information
of engine type.
4) On the «Engine Diagnosis» display screen, se-
lect the {Diagnostic Code(s) Display}, and then
press the [YES] key.
5) On the «Diagnostic Code(s) Display» display
screen, select the {Current Diagnostic Code(s)} or
{History Diagnostic Code(s)}, and then press the
[YES] key.
NOTE:
• For detailed operation procedure, refer to the
SUBARU SELECT MONITOR OPERATION MAN-
UAL.
• For detailed concerning diagnostic trouble codes,
refer to the List of Diagnostic Trouble Code (DTC).
<Ref. to IM-14, LIST, List of Diagnostic Trouble
Code (DTC).>
IM-8