Creating Labels for Punch Block
You can create labels to identify at a glance the numbers for the
wires or pins connected to a punch block.
Upper count
Lower count
1. Press
.
2. Select the blocks type with
.
In this example, we will select "4pairs".
Blank: Creates a table of two rows and one column.
3. Select the text type with
.
In this example, we will select "Pins".
Seri.
Pins
/
and then press
/
and then press
Blank
Creating Special Labels
4. Enter the upper count and then press
In this example, we will enter "1".
5. Enter the lower count and then press
In this example, "25" is entered automatically.
6. Enter the label length and then press
Setting range: 1 to 99.9 cm
7. Press
.
Top
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
.
Cleaning
.
Initializing the
Settings
.
Purpose-based Index
Key Menu Index
Frame and Table Lists
23