Ricoh WG-M1 Operating Manual page 89

How to Install the Mount
1. Align the screw to the tripod socket of the camera. Rotate the screw for fixing.
Appurtenant camera
platform
2. Inset the appurtenant camera platform with the nut into the adhesive mount and tighten the nut
to fix them.
3. Peel off a seal stuck to the underside of the adhesive mount to fix this product on a flat surface
such as a table. The angle of the mounted camera can be adjusted by loosening the nut. Make
sure to tighten the nut securely once the angle is determined.
88
Screw
Nut
Adhesive mount