Table of Contents
Advertisement
2.3
Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of the VW202xR/VW202B LCD monitor is specially
designed for VESA wall mount.
To detach the arm/base:
1.
Have the front of the monitor face down on a table.
2.
Remove the rubbers in the four screw holes (Figure 1).
3.
Use a screwdriver to remove the two screws on the arm (Figure 1), then slide
out the arm/base to detach it from the monitor (Figure 2).
Figure 1
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2-2
Downloaded from ManualMonitor.com Manuals
Rubbers in the
screw holes
Two screws
Arm/base
Figure 2
Chapter 2: Setup
Hide quick links:
Advertisement
Table of Contents
