Table of Contents
Advertisement
English
iRig PowerBridge status LED
The front LED lights up when iRig PowerBridge is connected to the main AC supply and an iRig accessory is
connected.
Note: This LED does NOT indicates the charge status of the battery.
Troubleshooting
I have connected iRig PowerBridge to the main AC supply but my iOS device is not charging and the LED
is off.
Remember to always connect your iRig digital accessory to the iRig PowerBridge's Mini-DIN port. Only after this
will your iOS device be charged.
Specifications
- PSU AC input: 100V-240V AC / 50-60Hz (0.3A MAX)
- PSU DC output: +5V DC / 2100mA (10.5W)
- iOS connectors: Lightning or 30-pin captive cable
- Compatible with iRig range of accessories, both with Mini-DIN and Micro-USB connector
- Size (without cables): 44mm x 27mm x 21mm
- Mini-DIN to Mini-DIN cable lenght: 60 cm
- Mini-DIN to micro-USB cable length: 150 cm
- Built-in LED for status indication
Warranty
Please visit:
www.ikmultimedia.com/warranty
for the complete warranty policy.
Support and more info
www.ikmultimedia.com/support
www.irigpowerbridge.com
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
9
Hide quick links:
Advertisement
Table of Contents
