Table of Contents
Advertisement
Problem
Problem
Some fl ash modes are
Some fl ash modes are
not available.
not available.
The fl ash does not fully
The fl ash does not fully
light the subject.
light the subject.
Pictures are blurred.
Pictures are blurred.
Pictures are mottled.
Pictures are mottled.
Vertical lines appear in
Vertical lines appear in
pictures.
pictures.
"Smear" in the form of
"Smear" in the form of
vertical purple or white
vertical purple or white
lines appears in the
lines appears in the
display.
display.
Sounds made by the
Sounds made by the
camera are recorded with
camera are recorded with
movies.
movies.
Downloaded From camera-usermanual.com Fujifilm Manuals
Troubleshooting
• • The desired fl ash mode is not available in the current shooting mode
The desired fl ash mode is not available in the current shooting mode: Choose a diff erent
P 24).
shooting mode (
shooting mode (P
24).
• • The camera is in silent mode
The camera is in silent mode: Turn silent mode off (
• • The subject is not in range of the fl ash
The subject is not in range of the fl ash: Position the subject in range of the fl ash (
• • The fl ash window is obstructed
The fl ash window is obstructed: Hold the camera correctly (
• • The protective glass covering the lens is dirty
The protective glass covering the lens is dirty: Clean the glass (
• • The protective glass covering the lens is blocked
The protective glass covering the lens is blocked: Keep objects away from the lens (
• • s
s is displayed during shooting and the focus frame is displayed in red
is displayed during shooting and the focus frame is displayed in red: Check focus
P 94).
before shooting (P
before shooting (
94).
• • k
k is displayed during shooting
is displayed during shooting: Use the fl ash or a tripod (
This is normal when slow shutter speeds are selected at high temperatures and does not indicate
This is normal when slow shutter speeds are selected at high temperatures and does not indicate
a malfunction.
a malfunction.
The camera has been used continuously at high temperatures. Turn the camera off and wait for
The camera has been used continuously at high temperatures. Turn the camera off and wait for
it to cool down.
it to cool down.
Vertical purple or white lines may appear after the camera has been used continuously at high
Vertical purple or white lines may appear after the camera has been used continuously at high
temperatures or when a very bright object is in the frame; this phenomenon is common to all CCD
temperatures or when a very bright object is in the frame; this phenomenon is common to all CCD
image sensors and does not indicate a malfunction. These lines are recorded in movies but do not
image sensors and does not indicate a malfunction. These lines are recorded in movies but do not
appear in photographs. Avoid framing bright objects when fi lming movies.
appear in photographs. Avoid framing bright objects when fi lming movies.
Do not adjust zoom during shooting.
Do not adjust zoom during shooting.
Solution
Solution
: Turn silent mode off (P
P 77).
: Position the subject in range of the fl ash (P
: Hold the camera correctly (P
: Clean the glass (P
: Keep objects away from the lens (P
: Use the fl ash or a tripod (P
Problems and Solutions
: Choose a diff erent
77).
P 20).
20).
P 87).
87).
: Check focus
P 35).
35).
P 104).
104).
P 20).
20).
91
Advertisement
Table of Contents
Troubleshooting
