Russell Hobbs RHMD702 User Manual page 25

HOW TO USE THE MICROWAVE
3. Turn the 'Auto Cooking, Time/Weight' dial clockwise until the
display shows '12:'. Press the 'Pre-Set/Defrost/Clock' dial to confirm.
4. The display will show '12:00' and the clock symbol will continue to
flash.
5. Set the minutes by turning the 'Auto Cooking, Time/Weight' dial
clockwise until the display shows '12:30'. Press the 'Pre-
Set/Defrost/Clock' button to confirm.
6. Select the cooking power by pressing the 'Power' button. When
pressed once, the screen display will show '100P' (100% power) and a 'H'
will be displayed to indicate High power.
7. Turn the 'Auto Cooking, Time/Weight' dial clockwise to the amount of
cooking time required – 9:30.
8. Press and hold the
set state.
9. Set the start time (14:20), repeating steps 3 to 5 above.
10. Press the 'Pre-Set/Defrost/Clock' button to confirm the pre-set
programme. It is now activated and the cooking will commence at 14:20.
Multi-sequence cooking function
For some recipes, results may be better if you wish to cook on different
power levels for different times, for one dish.
For example, if you wanted to cook for 3 minutes on full power followed
by 9 minutes on 20% power:
1. Press the 'Power' button once to select 100P.
2. Turn the 'Auto Cooking, Time/Weight' dial clockwise to 3:00.
3. Press 'Power' button five times to select 20P.
4. Turn the 'Auto Cooking, Time/Weight' dial clockwise to 9:00.
5. Press the 'Start' button to commence cooking.
Note: When the 3 minutes at 100P are up the 9 minutes at 20P will start
automatically. A maximum of 4 sequences can be set for one dish.
'Pre-Set/Defrost/Clock' button to confirm the pre-
25