Using The Remote Control; Batteries For The Remote Control - Sharp lc-22sv2u Operation Manual

Hide thumbs Also See for lc-22sv2u:
Table of Contents

Advertisement

PREPARATION
• Use the remote control by pointing it towards the remote control
sensor window on the main unit. Objects between the remote
control and sensor window may prevent proper operation.
o
0
PO./ER~ S~EP
II
I
I
L
SLEEP indicator
L-
OPC indicator
POWER indicator
OPC sensor
.._
Remote control
Cautions regarding use of the remote control
l=--.----r~ ~
sensor
• Do not expose the remote control to shock.
~
In addition, do not expose the remote control to liquid, and do not place
~
in an area with high humidity.
• Do not install or place the remote control under direct sunlight. The heat
~
;;f:/
may cause deformation of the unit.
~ff)r;,'
'
• The remote control may not work properly if the remote control sensor
~r
window of the main unit is under direct sunlight or strong lighting. In
2,1j}jf
such case, change the angle of the lighting or LCD TV set, or operate
~
the remote control closer to the remote control sensor window.
Before using the LCD TV set for the first time, install two ("AAA" size, UM/SUM-4) batteries (supplied).
When the batteries become depleted and the remote control fails to operate, replace the batteries with
new ("AAA" size, UM/SUM-4) batteries.
1
Open the battery
cover.
2
Insert two ("AAA" size,
UMI
SUM-4) batteries.
3
Close the battery
cover.
• Slide the cover while
pressing the ('t') part.
• Position the positive and
negative ends of the batteries
as indicated in the compart-
ment.
• Engage the claw on the
cover into the battery
housing and slide shut.
Cautions regarding batteries
Improper use of batteries can result in chemical leakage and/or explosion. Be sure to follow the instruc-
tions below.
• Place batteries with their terminals corresponding to the
(+)
and (-) as indicated in the compartment.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
battery and/or cause the old battery to leak chemicals.
• Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control will not be used for an extended period of time, remove the batteries from the
remote control.

Advertisement

Table of Contents
loading

Table of Contents