Selecting Automatic Auto Clock Set-Up - Optimus 16-421 Owner's Manual

16-421.fm Page 13 Tuesday, July 20, 1999 12:01 PM
• If a channel you wanted was not stored,
you can add the channel. If a channel
you did not want was stored, you can
delete the channel. See "Adding/Erasing
Channels" on Page 15.
• The TV/VCR retains stored channels
when you turn off the TV/VCR, or if
power to the TV/VCR is lost for up to 60
seconds.
When the TV/VCR finds all active channels, it
displays
CH AUTO SET COMPLETED
displays
AUTO CLOCK SET PROCEEDING
and automatically searches for an EDS signal
and sets the clock.
• If the TV/VCR finds an EDS signal during
the search, the clock is automatically set,
and a screen shows the currently set
date and time. Then the TV/VCR tunes
to the lowest stored channel.
• If the TV/VCR does not find an EDS sig-
nal during the search, you see:
If this occurs, the broadcaster you
selected did not transmit an EDS signal,
or there is no EDS broadcaster in your
area. Manually set the clock (see "Setting
the Clock Manually" on Page 15).
Note: Depending on the number of chan-
nels it tunes, the TV/VCR might take as
long as 10 minutes to search for an EDS
signal to set the clock.
Selecting Automatic Auto Clock
Set-Up
You can set the TV/VCR any time so it automat-
ically searches for a channel that has an EDS
signal and sets the clock.
1. Press
MENU
2. Repeatedly press
remote control to select
SET . The SET CLOCK
. Then it
the TV screen.
,
3. Press
SEL
trol to highlight
The
CHANNEL/CLOCK
screen appears.
4. To automatically set the clock, press
Notes:
• If you use a cable box, you must turn it
on and select an EDS broadcaster in
your time zone before pressing
• When you press
scans through all channels, even if no
channel in your area carries an EDS sig-
nal.
AUTO CLOCK
appears on the screen, and the TV/VCR
automatically searches for an EDS signal
and sets the clock.
• If the TV/VCR finds an EDS signal during
the search, the clock is automatically set,
and a screen shows the currently set
date and time. Then the TV/VCR tunes
to the lowest stored channel.
to display the main menu.
or on the
SEL SEL
CLOCK , then press
screen appears on
or on the remote con-
SEL
AUTO SET , then press
SET
AUTO SET
CH
CH
, the TV/VCR
CH
SET PROCEEDING
.
.
.
13