16-421.fm Page 11 Tuesday, July 20, 1999 12:01 PM
SETUP
FRONT PANEL
The buttons on the TV/VCR's front panel control
the TV and the VCR.
REMOTE CONTROL
All the remote control's buttons have the same
functions as the buttons on the TV/VCR's front
panel. In addition, the number buttons let you di-
rectly select channels and menu options and
settings, program, sleep and on timers, and
more.
POWER
ON TIMER SLEEP
PAUSE
PLAY
REW
ZERO/1 MIN
STOP
1
2
4
5
7
8
100
0
CLEAR
PROG
MENU
COUNTER
SPEED DISPLAY C. C.
RESET
SLOW
MUTE
REC/TIME
FAST-F
LCR
3
C H
6
9
VOL
ADD/DLT
SET
SEL
Installing Batteries
The remote control requires two AA batteries
(not supplied). For the longest operation and
best performance, we recommend alkaline bat-
teries (such as RadioShack Cat. No. 23-557).
Cautions:
• Use only fresh batteries of the required size
and type.
• Never leave dead batteries in the remote
control. Batteries can leak chemicals that
can damage electronic circuits.
• Dispose of dead batteries promptly and
properly; do not bury or burn them.
1. Press down on the battery compartment
cover's tab and lift off the cover.
2. Insert fresh batteries into the compart-
ment, as indicated by the polarity symbols
(+ and –) marked inside.
3. Replace the cover.
Note: If the remote control does not work or op-
erates poorly, replace both batteries.
Using the Remote Control
To use the remote control, aim the LED on the
front of the remote control toward the front of the
TV/VCR and press the desired button(s).
11